[问答]

esp32 idf v4.4连接不上WIFI的原因？

问答对人有帮助，内容完整，我也想知道答案 0 版本: esp32 idf v4.4 ssid和密码都是正确的，大部分情况下能够连接上wifi，但有时连接不上，失败reason,有时是 14,有时是 25, 有人遇到过没有？把所有日志全打开后的打印如下： E (34011) ESP32: Failed to connect to:qinglan1 ,reason:14,retry to connect to the AP:2. I (34019) ESP32: connect to the AP fail D (34125) wifi:rsn valid: gcipher=1 ucipher=3 akm=5 D (34125) wifi:find the 7c:da:c3:13:dc:25 in blacklist. D (34225) wifi:rsn valid: gcipher=1 ucipher=3 akm=5 D (34226) wifi:find the 7c:da:c3:13:dc:25 in blacklist. D (34251) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (34251) wifi:perform scan: ss_state=0x9, chan<1,0>, dur<0,120> V (34252) wifi:change: chan<1,0>, dur<0,240> V (34255) wifi:ht20 freq=2412, chan=1 V (34259) wifi:enter start op, arg=0x3f800b79 V (34262) wifi:scan operation: state=0x3, chan<1,0>, arg=0x3f800b79, status=0 V (34269) wifi:scan specific ssid=qinglan1 V (34273) wifi:start max timer D (34516) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (34517) wifi:perform scan: ss_state=0x9, chan<2,0>, dur<0,120> V (34517) wifi:change: chan<2,0>, dur<0,240> V (34520) wifi:ht20 freq=2417, chan=2 V (34524) wifi:enter start op, arg=0x3f800b79 V (34527) wifi:scan operation: state=0x3, chan<2,0>, arg=0x3f800b79, status=0 V (34534) wifi:scan specific ssid=qinglan1 V (34539) wifi:start max timer D (34781) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (34782) wifi:perform scan: ss_state=0x9, chan<3,0>, dur<0,120> V (34782) wifi:change: chan<3,0>, dur<0,240> V (34785) wifi:ht20 freq=2422, chan=3 V (34789) wifi:enter start op, arg=0x3f800b79 V (34793) wifi:scan operation: state=0x3, chan<3,0>, arg=0x3f800b79, status=0 V (34800) wifi:scan specific ssid=qinglan1 V (34804) wifi:start max timer D (35046) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (35047) wifi:perform scan: ss_state=0x9, chan<4,0>, dur<0,120> V (35047) wifi:change: chan<4,0>, dur<0,240> V (35050) wifi:ht20 freq=2427, chan=4 V (35054) wifi:enter start op, arg=0x3f800b79 V (35058) wifi:scan operation: state=0x3, chan<4,0>, arg=0x3f800b79, status=0 V (35065) wifi:scan specific ssid=qinglan1 V (35069) wifi:start max timer D (35311) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (35312) wifi:perform scan: ss_state=0x9, chan<5,0>, dur<0,120> V (35313) wifi:change: chan<5,0>, dur<0,240> V (35315) wifi:ht20 freq=2432, chan=5 V (35319) wifi:enter start op, arg=0x3f800b79 V (35323) wifi:scan operation: state=0x3, chan<5,0>, arg=0x3f800b79, status=0 V (35330) wifi:scan specific ssid=qinglan1 V (35334) wifi:start max timer D (35576) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (35577) wifi:perform scan: ss_state=0x9, chan<6,0>, dur<0,120> V (35578) wifi:change: chan<6,0>, dur<0,240> V (35581) wifi:ht20 freq=2437, chan=6 V (35584) wifi:enter start op, arg=0x3f800b79 V (35588) wifi:scan operation: state=0x3, chan<6,0>, arg=0x3f800b79, status=0 V (35595) wifi:scan specific ssid=qinglan1 V (35599) wifi:start max timer D (35842) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (35843) wifi:perform scan: ss_state=0x9, chan<7,0>, dur<0,120> V (35843) wifi:change: chan<7,0>, dur<0,240> V (35846) wifi:ht20 freq=2442, chan=7 V (35850) wifi:enter start op, arg=0x3f800b79 V (35854) wifi:scan operation: state=0x3, chan<7,0>, arg=0x3f800b79, status=0 V (35861) wifi:scan specific ssid=qinglan1 V (35865) wifi:start max timer D (36107) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (36108) wifi:perform scan: ss_state=0x9, chan<9,0>, dur<0,120> V (36109) wifi:change: chan<9,0>, dur<0,240> V (36111) wifi:ht20 freq=2452, chan=9 V (36115) wifi:enter start op, arg=0x3f800b79 V (36119) wifi:scan operation: state=0x3, chan<9,0>, arg=0x3f800b79, status=0 V (36126) wifi:scan specific ssid=qinglan1 V (36130) wifi:start max timer D (36372) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (36373) wifi:perform scan: ss_state=0x9, chan<10,0>, dur<0,120> V (36374) wifi:change: chan<10,0>, dur<0,240> V (36377) wifi:ht20 freq=2457, chan=10 V (36381) wifi:enter start op, arg=0x3f800b79 V (36384) wifi:scan operation: state=0x3, chan<10,0>, arg=0x3f800b79, status=0 V (36391) wifi:scan specific ssid=qinglan1 V (36396) wifi:start max timer E (36636) ESP32: Failed connect to because wifi not connected. E (36636) ESP32: [ 2.3 ] Connect to bserver failed. D (36638) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (36642) wifi:perform scan: ss_state=0x9, chan<11,0>, dur<0,120> V (36648) wifi:change: chan<11,0>, dur<0,240> V (36652) wifi:ht20 freq=2462, chan=11 V (36656) wifi:enter start op, arg=0x3f800b79 V (36659) wifi:scan operation: state=0x3, chan<11,0>, arg=0x3f800b79, status=0 V (36666) wifi:scan specific ssid=qinglan1 V (36671) wifi:start max timer D (36913) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (36914) wifi:perform scan: ss_state=0x9, chan<12,0>, dur<360,360> V (36915) wifi:change: chan<12,0>, dur<0,240> V (36918) wifi:ht20 freq=2467, chan=12 V (36922) wifi:enter start op, arg=0x3f800b79 V (36925) wifi:scan operation: state=0x3, chan<12,0>, arg=0x3f800b79, status=0 V (36932) wifi:passive scan, listen only V (36936) wifi:start max timer D (37179) wifi:scan end: arg=0x0, status=0, ss_state=0x3 D (37179) wifi:perform scan: ss_state=0x9, chan<13,0>, dur<360,360> V (37180) wifi:change: chan<13,0>, dur<0,240> V (37183) wifi:ht20 freq=2472, chan=13 V (37187) wifi:enter start op, arg=0x3f800b79 V (37191) wifi:scan operation: state=0x3, chan<13,0>, arg=0x3f800b79, status=0 V (37198) wifi:passive scan, listen only V (37201) wifi:start max timer D (37444) wifi:scan end: arg=0x0, status=0, ss_state=0x3 V (37445) wifi:back home chan=<8,0>, current chan=<13,0> V (37445) wifi:ht20 freq=2447, chan=8 D (37447) wifi:filter: set rx policy=4 D (37450) wifi:first chan=1 V (37453) wifi:scan_done: arg=0x0, status=0, cur_time=32931286, scan_id=128, scan state=0 V (37461) wifi:call scan_done cb, arg=0x0 D (37464) wifi:handoff_cb: status=0 V (37468) wifi:there is only one ap in blacklist now, release it! D (37473) wifi:clear blacklist D (37476) wifi:clear rc list D (37479) wifi:clear blacklist D (37481) wifi:send disconnect event D (37485) wifi:connect status 1 -> 3 D (37488) wifi:disable connect timer D (37491) wifi:clear scan ap list D (37495) event: running post WIFI_EVENT:5 with handler 0x4017b8e4 and context 0x3ffd3b84 on loop 0x3ffb77c8 D (37504) esp_netif_handlers: esp_netif action disconnected with netif0x3ffd39c4 from event_id=5 D (37513) esp_netif_lwip: check: remote, if=0x3ffd39c4 fn=0x40179344 D (37520) esp_netif_lwip: esp_netif_down_api esp_netif:0x3ffd39c4 D (37526) esp_netif_lwip: esp_netif_start_ip_lost_timer esp_netif:0x3ffd39c4 D (37533) esp_netif_lwip: if0x3ffd39c4 start ip lost tmr: no need start because netif=0x3ffd3a24 interval=120 ip=0 D (37543) esp_netif_lwip: check: local, if=0x3ffd39c4 fn=0x40179d8c D (37550) esp_netif_lwip: esp_netif_update_default_netif_lwip 0x3ffd39c4 V (37557) esp_netif_objects: esp_netif_next_unsafe 0x0 V (37562) esp_netif_lwip: esp_netif_is_netif_up esp_netif:0x3ffd39c4 V (37568) esp_netif_objects: esp_netif_next_unsafe 0x3ffd39c4 D (37574) esp_netif_lwip: call api in lwip: ret=0x0, give sem D (37580) event: running post WIFI_EVENT:5 with handler 0x400dd010 and context 0x3ffd3bfc on loop 0x3ffb77c8 I (38591) ESP32: Waiting registered. E (38591) ESP32: [ 2.3 ] Connect to voip server[:80] failed. E (39637) ESP32: Failed connect to because wifi not connected. E (39637) ESP32: [ 2.3 ] Connect to bserver failed. V (42590) esp_adapter: thread sem get: sem=0x3ffe0e98 D (42590) wifi:Start wifi disconnect D (42590) wifi:connect status 3 -> 0 D (42590) wifi:filter: set rx policy=8 V (42594) esp_adapter: thread sem get: sem=0x3ffe0e98 D (42599) wifi:Start wifi connect D (42602) wifi:connect status 0 -> 0 D (42605) wifi:connect chan=0 D (42608) wifi:first chan=8 D (42611) wifi:connect status 0 -> 1 D (42614) wifi:filter: set rx policy=3 D (42617) wifi:clear scan ap list D (42620) wifi:start scan: type=0x50f, priority=2, cb=0x401b6300, arg=0x0, ss_state=0x1, time=38099051, index=0 V (42630) wifi:inter_channel_timeout: arg=0x0, ss_state=0x1 D (42636) wifi:perform scan: ss_state=0x9, chan<8,0>, dur<0,120> E (42638) ESP32: Failed connect to because wifi not connected. V (42642) wifi:E (42648) ESP32: [ 2.3 ] Connect to bserver failed. change: chan<8,0>, dur<0,240> V (42657) wifi:enter start op, arg=0x3f800b79 V (42661) wifi:scan operation: state=0x3, chan<8,0>, arg=0x3f800b79, status=0 V (42668) wifi:scan specific ssid=qinglan1 V (42673) wifi:start max timer D (42677) wifi:rsn valid: gcipher=1 ucipher=3 akm=5 D (42681) wpa: rsn_ie - hexdump(len=26): D (42684) wpa: 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f D (42690) wpa: ac 02 01 00 00 0f ac 02 0c 00 D (42694) wifi:profile match: ss_state=0x7 V (42698) wifi:update scan history ssid=qinglan1, channel=8 D (42704) wifi:scan end: arg=0x0, status=0, ss_state=0x7 D (42708) wifi:find first mathched ssid, scan done V (42713) wifi:back home chan=<8,0>, current chan=<8,0> D (42718) wifi:filter: set rx policy=4 D (42721) wifi:first chan=1 V (42724) wifi:scan_done: arg=0x0, status=0, cur_time=38202360, scan_id=128, scan state=0 V (42732) wifi:call scan_done cb, arg=0x0 D (42735) wifi:handoff_cb: status=0 V (42739) wifi:best bss has set. D (42741) wifi:ap found, mac=7c:da:c3:13:dc:25 V (42746) wifi:bssid=7c:da:c3:13:dc:25, LR=0 D (42750) wifi:new_bss=0x3f8015a8, cur_bss=0x0, new_chan=<8,0>, cur_chan=8 D (42756) wifi:filter: set rx policy=5 I (42760) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 D (42766) wifi:connect_op: status=0, auth=5, cipher=3 D (42771) wifi:auth mode is not none D (42774) wifi:connect_bss: auth=1, reconnect=0 I (42778) wifi:state: init -> auth (b0) D (42783) wifi:start 1s AUTH timer D (42785) wifi:clear scan ap list E (42790) ESP32: Failed to connect to:qinglan1 ,reason:205,retry to connect to the AP:3. I (42797) ESP32: connect to the AP fail D (42797) wifi:recv auth: seq=2, status=0 I (42805) wifi:state: auth -> assoc (0) D (42810) wifi:restart connect 1s timer for assoc D (42858) wifi:recv assoc: type=0x10 D (42859) wifi:filter: set rx policy=6 I (42860) wifi:state: assoc -> run (10) D (42860) wifi:start 10s connect timer for 4 way handshake D (42894) wifi:recv deauth, reason=0xe I (42895) wifi:state: run -> init (ec0) D (42895) wifi:recv deauth/disassoc, stop beacon/connect timer D (42896) wifi:connect status 1 -> 2 D (42899) wifi:add bssid 7c:da:c3:13:dc:25 to blacklist, cnt=0 D (42905) wifi:stop CSA timer D (42908) wifi:remove 7c:da:c3:13:dc:25 from rc list I (42912) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 D (42918) wifi:filter: set rx policy=8 D (42922) wifi:sta leave D (42924) wifi:stop CSA timer D (42927) wifi:remove 00:00:00:00:00:00 from rc list I (42932) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 D (42938) wifi:filter: set rx policy=8 D (42941) wifi:Send disconnect event, reason=14, AP number=0 D (42947) event: running post WIFI_EVENT:5 with handler 0x4017b8e4 and context 0x3ffd3b84 on loop 0x3ffb77c8 D (42956) esp_netif_handlers: esp_netif action disconnected with netif0x3ffd39c4 from event_id=5 D (42965) esp_netif_lwip: check: remote, if=0x3ffd39c4 fn=0x40179344 D (42972) esp_netif_lwip: esp_netif_down_api esp_netif:0x3ffd39c4 D (42978) esp_netif_lwip: esp_netif_start_ip_lost_timer esp_netif:0x3ffd39c4 D (42985) esp_netif_lwip: if0x3ffd39c4 start ip lost tmr: no need start because netif=0x3ffd3a24 interval=120 ip=0 D (42995) esp_netif_lwip: check: local, if=0x3ffd39c4 fn=0x40179d8c D (43002) esp_netif_lwip: esp_netif_update_default_netif_lwip 0x3ffd39c4 V (43009) esp_netif_objects: esp_netif_next_unsafe 0x0 V (43014) esp_netif_lwip: esp_netif_is_netif_up esp_netif:0x3ffd39c4 V (43020) esp_netif_objects: esp_netif_next_unsafe 0x3ffd39c4 D (43026) esp_netif_lwip: call api in lwip: ret=0x0, give sem D (43032) event: running post WIFI_EVENT:5 with handler 0x400dd010 and context 0x3ffd3bfc on loop 0x3ffb77c8 I (43591) ESP32: Waiting registered. E (43591) ESP32: [ 2.3 ] Connect to voip server[:80] failed. E (45655) ESP32: Failed connect to because wifi not connected. E (45655) ESP32: [ 2.3 ] Connect to bserver failed. V (48042) esp_adapter: thread sem get: sem=0x3ffe0e98 D (48042) wifi:Start wifi disconnect D (48042) wifi:connect status 2 -> 0 D (48042) wifi:filter: set rx policy=8 V (48046) esp_adapter: thread sem get: sem=0x3ffe0e98 D (48051) wifi:Start wifi connect D (48054) wifi:connect status 0 -> 0 D (48057) wifi:connect chan=0 D (48060) wifi:first chan=8 D (48063) wifi:connect status 0 -> 1 D (48066) wifi:filter: set rx policy=3 D (48069) wifi:clear scan ap list D (48072) wifi:start scan: type=0x50f, priority=2, cb=0x401b6300, arg=0x0, ss_state=0x1, time=43551049, index=0 V (48082) wifi:inter_channel_timeout: arg=0x0, ss_state=0x1 D (48088) wifi:perform scan: ss_state=0x9, chan<8,0>, dur<0,120> V (48094) wifi:change: chan<8,0>, dur<0,240> V (48097) wifi:enter start op, arg=0x3f800b79 V (48101) wifi:scan operation: state=0x3, chan<8,0>, arg=0x3f800b79, status=0 V (48108) wifi:scan specific ssid=qinglan1 V (48113) wifi:start max timer E (48115) ESP32: Failed to connect to:qinglan1 ,reason:14,retry to connect to the AP:4. D (48122) wifi:I (48124) ESP32: connect to the AP fail Top 以下内容为评论 dengbq Posts: 38 Joined: Thu Mar 31, 2022 8:45 am Re: ssid和密码都正确,但是连接不上WIFI Quote Postby dengbq » Wed Nov 23, 2022 1:34 am 补充：手机和电脑都能够正常连接到这个wifi，只有esp32在一些情况下不行，烧station工程的打印： I (1447) wifi station: ESP_WIFI_MODE_STA I (1457) wifi:wifi driver task: 3ffc97ac, prio:23, stack:3584, core=0 I (1457) system_api: Base MAC address is not set I (1457) system_api: read default base MAC address from EFUSE I (1477) wifi:wifi firmware version: 7679c42 I (1477) wifi:wifi certification version: v7.0 I (1477) wifi:config NVS flash: enabled I (1477) wifi:config nano formating: disabled I (1477) wifi:Init data frame dynamic rx buffer num: 32 I (1487) wifi:Init management frame dynamic rx buffer num: 32 I (1487) wifi:Init management short buffer num: 32 I (1497) wifi:Init static tx buffer num: 16 I (1497) wifi:Init tx cache buffer num: 32 I (1497) wifi:Init static rx buffer size: 1600 I (1507) wifi:Init static rx buffer num: 10 I (1507) wifi:Init dynamic rx buffer num: 32 I (1517) wifi_init: rx ba win: 6 I (1517) wifi_init: tcpip mbox: 32 I (1517) wifi_init: udp mbox: 6 I (1527) wifi_init: tcp mbox: 6 I (1527) wifi_init: tcp tx win: 5744 I (1537) wifi_init: tcp rx win: 5744 I (1537) wifi_init: tcp mss: 1440 I (1547) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07 I (1657) wifi:mode : sta (0c:dc:7e:c4:97:24) I (1657) wifi:enable tsf I (1657) wifi station: wifi_init_sta finished. I (2637) wifi<8,0>, old:<1,0>, ap:<255,255>, sta:<8,0>, prof:1 I (2637) wifi:state: init -> auth (b0) I (2657) wifi:state: auth -> assoc (0) I (2677) wifi:state: assoc -> run (10) I (2697) wifi:state: run -> init (ec0) I (2697) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (2697) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 E (2707) wifi station: retry to connect to the AP:14 I (2707) wifi station: connect to the AP fail E (4757) wifi station: retry to connect to the AP:205 I (4757) wifi station: connect to the AP fail I (5807) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (5807) wifi:state: init -> auth (b0) I (5817) wifi:state: auth -> assoc (0) I (5837) wifi:state: assoc -> run (10) I (5867) wifi:state: run -> init (ec0) I (5867) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (5867) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 E (5877) wifi station: retry to connect to the AP:14 I (5877) wifi station: connect to the AP fail E (7927) wifi station: retry to connect to the AP:205 I (7927) wifi station: connect to the AP fail I (8987) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (8987) wifi:state: init -> auth (b0) I (8997) wifi:state: auth -> assoc (0) I (9007) wifi:state: assoc -> run (10) I (9017) wifi:state: run -> init (ec0) I (9027) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (9027) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 E (9027) wifi station: retry to connect to the AP:14 I (9027) wifi station: connect to the AP fail E (11087) wifi station: retry to connect to the AP:205 I (11087) wifi station: connect to the AP fail I (12067) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (12067) wifi:state: init -> auth (b0) I (12077) wifi:state: auth -> assoc (0) I (12097) wifi:state: assoc -> run (10) I (12207) wifi:state: run -> init (ec0) I (12207) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (12207) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 E (12207) wifi station: retry to connect to the AP:14 I (12217) wifi station: connect to the AP fail E (14267) wifi station: retry to connect to the AP:205 I (14267) wifi station: connect to the AP fail I (15337) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (15337) wifi:state: init -> auth (b0) I (15337) wifi:state: auth -> assoc (0) I (15357) wifi:state: assoc -> run (10) I (15387) wifi:state: run -> init (ec0) I (15387) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (15387) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 E (15397) wifi station: retry to connect to the AP:14 I (15397) wifi station: connect to the AP fail E (17447) wifi station: retry to connect to the AP:205 I (17447) wifi station: connect to the AP fail I (18507) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (18507) wifi:state: init -> auth (b0) I (18517) wifi:state: auth -> assoc (0) I (18527) wifi:state: assoc -> run (10) I (18667) wifi:state: run -> init (ec0) I (18667) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (18667) wifi<8,0>, old:<8,0>, ap:<255,255>, sta:<8,0>, prof:1 I (18667) wifi station: connect to the AP fail I (18677) wifi station: Failed to connect to SSID:qinglan1, password:xxxxx 0 本主题由 Harmony技术专家于 2024-6-7 10:53 审核通过
2024-6-7 08:18:46　　评论淘帖0 邀请回答您可以邀请以下用户，快速回答问题 × hgimtk 该类别下有 38 个回答。邀请回答 wang21cj 该类别下有 38 个回答。邀请回答 zyh34997 该类别下有 32 个回答。邀请回答就好国dd 该类别下有 32 个回答。邀请回答新星之火12138 该类别下有 32 个回答。邀请回答 chm5 该类别下有 32 个回答。邀请回答 zaichenxi 该类别下有 31 个回答。邀请回答 heks 该类别下有 31 个回答。邀请回答 flowerddd 该类别下有 29 个回答。邀请回答 muwersddg 该类别下有 29 个回答。邀请回答四川赵赵该类别下有 29 个回答。邀请回答 caosurround 该类别下有 28 个回答。邀请回答星星公交站该类别下有 28 个回答。邀请回答 vinww特烦恼该类别下有 28 个回答。邀请回答 723662364d 该类别下有 27 个回答。邀请回答安德森大该类别下有 27 个回答。邀请回答 lkjflksjfsa 该类别下有 27 个回答。邀请回答 xwgc888 该类别下有 27 个回答。邀请回答 overheat 该类别下有 27 个回答。邀请回答 h1654155143.8331 该类别下有 27 个回答。邀请回答举报张鑫相关推荐 • ESP-IDF V4.4缺失函数esp_ble_scan_dupilcate_list_flush要怎么办？ 134 • ESP_IDF 4.4.3版本下csi数据无法打印的原因？如何解决？ 169 • ESP_IDF 4.4.3版本下csi数据无法打印是怎么回事？ 125 • ESP_IDF 4.4.3版本下csi数据无法打印怎么解决？ 183 • vscode通过espressif插件安装esp-idf v4.4失败了如何解决？ 163 • ESP-IDF v4.4的LCD外设lvgl例程直接build会报错的原因？ 246 • ESP_IDF 4.4.3版本下csi数据无法打印的问题如何处理？ 134 • 有没有什么更好的方式下载安装espidf呢? 221 • 使用esp-idf-tools2.12不能搭建esp32s3开发环境的原因？ 227 • 通过ubuntu16.04安装esp-idf v4.4失败，有什么解决方法吗？ 166 1个回答

答案对人有帮助，有参考价值 0 根据您提供的信息，您的ESP32 IDF v4.4在连接WiFi时遇到了一些问题。这里有几个可能的原因和解决方案： 1. WiFi信号强度：如果WiFi信号强度较弱，可能导致连接不稳定。请确保ESP32设备靠近路由器，并检查信号强度。 2. 信道干扰：如果您的路由器和附近的其他WiFi设备使用相同的信道，可能会导致信道干扰。尝试更改路由器的信道设置，以减少干扰。 3. 路由器设置：检查路由器的设置，确保没有MAC地址过滤或其他限制措施阻止ESP32设备连接。 4. 固件问题：尝试更新ESP32的固件到最新版本，以解决可能的已知问题。 5. 电源问题：确保ESP32设备电源稳定，因为电源波动可能会影响WiFi连接。 6. 代码问题：检查您的代码，确保WiFi连接部分没有错误。例如，SSID和密码是否正确，以及连接超时设置是否合理。 7. 硬件问题：如果可能，请尝试使用另一个ESP32设备，以排除硬件故障的可能性。 8. 日志中的错误代码：您提到的错误代码14和25可能表示特定的问题。错误代码14通常表示连接超时，而错误代码25可能表示身份验证失败。这可能与路由器设置或设备固件有关。 9. 黑名单问题：日志中提到的“find the 7c:da:c3:13:dc:25 in blacklist”表明该设备可能被路由器加入了黑名单。检查路由器设置，确保ESP32设备的MAC地址没有被加入黑名单。 10. 重置网络设置：尝试重置ESP32的网络设置，以恢复默认状态。如果以上方法都不能解决问题，您可以尝试在ESP32社区或论坛上寻求帮助，那里可能有其他开发者遇到过类似的问题并提供了解决方案。

2024-6-7 11:02:27 评论