ESP32S3(FN8和FR8）分区表超过4MB upload后不断重启怎么解决？

开发环境vscode  Platformio

• 使用芯片（ESP32 S3 FN8 和 ESP32 S3 FR8)
  

• 开发框架是arduino-esp32（https://github.com/espressif/arduino-esp32）
  

• platformio.ini 相关配置
  

Code: Select all
[env:esp32s3]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
upload_port = COM3
monitor_speed = 115200
board_build.partitions = default_8MB.csv[/Codebox]

• 已更改sdkconfig.h无任何作用
  

Code: Select all
#define CONFIG_ESPTOOLPY_FLASHSIZE_8MB 1
#define CONFIG_ESPTOOLPY_FLASHSIZE "8MB"
#define CONFIG_ESPTOOLPY_FLASHSIZE_DETECT 1

• 下面分区表会不断重启（default_8MB.csv）
  

Code: Select all
# Name,   Type, SubType, Offset,  Size, Flags
nvs,      data, nvs,     0x9000,  0x5000,
otadata,  data, ota,     0xe000,  0x2000,
app0,     app,  ota_0,   0x10000, 0x330000,
app1,     app,  ota_1,   0x340000,0x330000,
spiffs,   data, spiffs,  0x670000,0x190000,

• 下面分区表运行正常（default.csv）
  

Code: Select all
# Name,   Type, SubType, Offset,  Size, Flags
nvs,      data, nvs,     0x9000,  0x5000,
otadata,  data, ota,     0xe000,  0x2000,
app0,     app,  ota_0,   0x10000, 0x330000,
spiffs,   data, spiffs,  0x340000,0xc0000,

• 串口输出错误
  

Code: Select all
rst:0x3 (RTC_SW_SYS_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x403bb022
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fcd0108,len:0x78
load:0x403b6000,len:0x95c
load:0x403ba000,len:0x26f8
entry 0x403b61a8
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x3 (RTC_SW_SYS_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x403bb022
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fcd0108,len:0x78
load:0x403b6000,len:0x95c
load:0x403ba000,len:0x26f8
entry 0x403b61a8
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x3 (RTC_SW_SYS_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)