PSOC编程器USB协议文档记录在哪里？

HTTP://www. CyPress？COM/？RID＝38154微型机器人3
HTTP://www. CyPress？COM/？RID＝2543 PSoC程序设计
问候，Dana。



     以下为原文
  

                  
    http://www.cypress.com/?rID=38154     Miniprog 3
     
    http://www.cypress.com/?rID=2543     PSOC Programming
   

    Regards, Dana.

这些都是优秀的资源，Dana，但我相信他们是不够的。
我找的是口语在PC和FX2LP，miniprog3 PSoC编程软件之间的USB协议，PSoC 4先锋，等。这样我就可以实现自己的程序员能够与程序员为PSoC交流闪光装置。除非我误解你所提供的资料，他们没有提供USB接口的细节。他们都描述了如何一个程序员和编程设备之间进行通信。
同样，HSSP应用笔记没有解释具体端点配置和数据传输的PC和程序员之间的协议；他们解释程序和可编程器件之间的SWD协议。



     以下为原文
  Those are exellent resources, Dana, but I believe they are insufficient.
    I am looking for the USB protocol that is spoken between the PSoC Programmer software on the PC and the FX2LP, MiniProg3, PSoC 4 Pioneer, etc.. so that I can implement my own programmer which can communicate with PSoC Programmer in order to flash the devices. Unless I am misreading the documentation you provided, none of them provide the USB interface details. They all describe how to communicate between a programmer and device to be programmed.
    Similarly, the HSSP application notes do not explain the specific endpoint configuration and data transfer protocol between the PC and the programmer; they explain the SWD protocol between the programmer and device to be programmed.

这是一个内部协议，并没有在任何地方被记录。但是你总是可以在PC端编写你自己的程序员，因为它只需要把数据传送给你自己的程序员（然后再使用公共协议来编程PSoC）。



     以下为原文
  AFAIK this is an internal protocol, and is not documented anywhere. But you can always write your own programmer on the PC side, since it just need to transfer the data to your own programmer (which then in turn uses the public protocol to program the PSoC).

我想我听说CyPress在签署NDA时放弃了PrimoLL软件，并且有很好的理由来制造一个程序员等等。
最好是通过创建一个“MyCase'来联系CyPress”（在这个页面顶部的“支持和社区”-gt；”技术支持“-gt；”创建一个MyCase]
鲍勃



     以下为原文
  I think I have heard that Cypress is giving away the protocoll software when you sign an NDA and have good reasons as manufacturing a programmer etc.
    Best would be to contact Cypress by creating a "MyCase" (At top of this page "Support&Community"->"Technical Support"->"Create a MyCase")
     
    Bob

我猜它是主要有人建造的一个程序员，不能正常工作与psocprogrammer他们不得不应付所有支持电话本的原因。



     以下为原文
   I'm guessing it's mainly having anyone build a programmer that won't work properly with psocprogrammer and they having to deal with all the support calls this causes.