完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
这个应该是你的操作有问题,说说你的操作。
|
|
|
|
Flash_Loader_Demonstrator--这个软件是ST开发的专门用于串口下载程序的软件,可以识别HEX BIN文件,还是挺好用的。
使用这个软件的前提,调试好串口电路,板载串口电路或者为开发板增加一个 USB转串口电路模块 |
|
|
|
楼上正解、、、
|
|
|
|
应该是可以的,弄个max232就好
|
|
|
|
|
|
|
|
肯定可以啊,电路要配合好
|
|
|
|
用STM32F105RB UART1 ISP 可以下载 另外:
If USART1 is used to connect to the bootloader: the USART2_RX (PD6), CAN2_RX (PB5), OTG_FS_DM (PA11) and OTG_FS_DP (PA12) pins have to be kept at a high or low level and must not be left floating during the detection phase 悬空这些引脚也是可以下载的。没有问题 |
|
|
|
1) stm32都可以通过默认的串口1烧写(必须是默认的串口),这是因为stm32内置的固件只支持默认串口1.
2)串口需要max232等串口电路下载; 3)如不能下载,请检查uart电路是不是连接在默认串口1上,检查串口电路是否正常通讯 |
|
|
|
不能支持!
Bootloader unavailability on STM32F105xx/STM32F107xx devices with a date code below 937 Description The bootloader cannot be used if the USART1_RX (PA10), USART2_RX (PD6, remapped), CAN2_Rx (PB5, remapped), OTG_FS_DM (PA11), and/or OTG_FS_DP (PA12) pin(s) are held low or left floating during the bootloader activation phase. The bootloader cannot be connected through CAN2 (remapped), DFU (OTG FS in Device mode), USART1 or USART2 (remapped). On 64-pin packages, the USART2_RX signal remapped PD6 pin is not available and it is internally grounded. In this case, the bootloader cannot be used at all. Workaround • For 64-pin packages None. The bootloader cannot be used. • For 100-pin packages Depending on the used peripheral, the pins for the unused peripherals have to be kept at a high level during the bootloader activation phase as described below: – If USART1 is used to connect to the bootloader, PD6 and PB5 have to be kept at a high level. – If USART2 is used to connect to the bootloader, PA10, PB5, PA11 and PA12 have to be kept at a high level. – If CAN2 is used to connect to the bootloader, PA10, PD6, PA11 and PA12 have to be kept at a high level. – If DFU is used to connect to the bootloader, PA10, PB5 and PD6 have to be kept at a high level. |
|
|
|
参考文件《AN2606 Application note STM32 microcontroller system memory boot mode》
|
|
|
|
应该是可以的,弄个max232就好
|
|
|
|
肯定可以
|
|
|
|
可以的。与103是一样的
|
|
|
|
你正在撰写答案
如果你是对答案或其他答案精选点评或询问,请使用“评论”功能。
STM32进行DMA数据转运,为什么只有A组最后一位数据被转运到B组去?
1229 浏览 2 评论
1561 浏览 3 评论
1185 浏览 0 评论
嵌入式开发 Win11安装ST-Link 提示 设备描述符请求失败 怎么处理?
1317 浏览 0 评论
1604 浏览 1 评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-8-17 10:19 , Processed in 0.803956 second(s), Total 67, Slave 61 queries .
Powered by 电子发烧友网
© 2015 www.ws-dc.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号