完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
本帖最后由 一只耳朵怪 于 2018-6-11 14:04 编辑
1. For a TM4C129 with Ethernet PHY enabled and a crystal other than 24-25Mhz, the USB DFU will show up in the device manager but not download. To correct the same add a resistor of 4.89K between RBIAS and GND pin for the ROM Boot Loader to work with the USB DFU 2. Other than above for a TM4C129 and TM4C123 which has the same issue, if the CCSv6 has been installed then the drivers for the USB DFU may have been overwritten. To revert the driver, in the device manager uninstall the USB DFU driver and replace it with the stellaris_icdi_drivers from www.ti.com/.../stellaris_icdi_drivers |
|
相关推荐
|
|
只有小组成员才能发言,加入小组>>
871 浏览 0 评论
TMS320F28377D:新做了以377d为芯片的板子,上电后芯片复位引脚出现方波请问如何解决?
2057 浏览 0 评论
TPS55340通电后输入端保险丝烧断,芯片输入和GND之间短路
3792 浏览 4 评论
5151 浏览 0 评论
请问如何用DM368对RGB格式的图片数据进行编码生成JPEG格式图片?
1843 浏览 1 评论
CC3100BOOST使用CC3200lunchXL进行烧录
837浏览 2评论
74浏览 2评论
84浏览 2评论
72浏览 2评论
102浏览 2评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-8-18 17:42 , Processed in 0.623155 second(s), Total 75, Slave 59 queries .
Powered by 电子发烧友网
© 2015 www.ws-dc.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号